The AWT-100X is Goodway's most powerful device developed to clean heat exchanger tubes and pipes. The system is air-powered and therefore a favorite in the industrial cleaning sector. The device can be used with or without water.
Customer reviews:
We use the Goodway Benelux AWT-100X tube cleaning system and GTC-721G flexible shafts for a yearly cleaning of our shell and tube heat exchangers on-site. The combination of the strong shafts and powerful AWT-100X tube cleaner ensures that the tubes can be cleaned very effectively without water.
We use the AWT-100X and RAM-4X tube cleaners of Goodway Benelux to provide boiler tube cleaning services at our customers. The combination of flex hub scrapers and nylon abrasive brushes makes for good cleaning results, even if the deposits are harder.
We rented an AWT-100X tube cleaner from Goodway Benelux to clean the fire tubes in our boilers. These are normally cleaned with a different system, but the level of fouling was too high. The AWT-100X in combination with the flex hub scraper and nylon abrasive brushes is ideal for removing (hard) deposits. We received support and service from Goodway Benelux and were able to carry out the cleaning very well. It was the first time we worked with this device.
We have multiple large evaporators with a total of over 3.000 tubes on our production plant. Goodway Benelux combined the delivery of the evaporator tube cleaning equipment with a practical training given by their two experts to our operators. It was a good session in which we learned how to use the equipment and what it could do for us. We were immediately impressed by the effectiveness and simplicity of the equipment. Our evaporator tubes can now be cleaned on a regular basis with the correct equipment.
We use the AWT-100X for cleaning a shell-tube heat exchanger. Due to the adjustable brushes, both in diameter and stiffness, this is a very efficient device.
We have purchased an AWT-100X system and accessories from Goodway Benelux for the dry cleaning of various piping in our factory. With the heavy-duty flex hub tools and brushes it is possible to remove different types of fouling. The advantage is that the system does most of the work and we ourselves have less labor and downtime.
We purchased the AWT-100X from Goodway Benelux to clean falling film evaporator tubes at one of our factories. After some initial testing we were able to clean the evaporator tubes ourselves easily and effectively. The equipment is powerful and allows us to remove (harder) fouling and/or blockages inside the tubes whenever necessary. After half a year, we have decided to purchase another AWT-100X system. This one will be used to clean our firetube boilers.
We have now had the opportunity to use the AWT-100X machine we purchased from yourselves and I am glad to say it has done a great job in a difficult environment.
We urgently needed a complete package to clean the fire tubes of our boiler installation. We have chosen the AWT-100X device + accessories which were available the same day for pickup. The system is very powerful and easy to use. With the right accessories we have been able to get our tubes clean again. We are very satisfied with the device and accessories.
After cleaning our fire tubes with high-pressure water, a lot of deposits remained inside the tubes. That is why we have opted for a mechanical technique to remove the deposits by means of rotating brushes and tools. An employee of Goodway Benelux helped us during the delivery with an explanation and demonstration. An extra advantage is that we will use less fuel to produce the same heat. The more deposits inside the tubes, the more energy it takes to make steam. We are satisfied.
We use the AWT-100X tube cleaning system as an addition to our cleaning solutions because it is not always necessary to use large machines such as a high-pressure units of 1000 bar 750 hp 260 l/minute for tube cleaning jobs. The advantage of the AWT-100X is that we can use this machine with or without water, the device does what it is supposed to do and gives us a lot of new possibilities.
We tested the AWT-100X on our falling film evaporators and our employees were immediately impressed. The device is light, easy and safe to use. After a short introduction, we were able to get started with the device on our own. In addition, the support of Goodway Benelux was very polite and well prepared. After the short test phase, the device was immediately ordered.
Most powerful tube cleaning system
The Goodway AWT-100X tube cleaning system is Goodway's most powerful device, developed to effectively clean heat exchanger tubes and various types of piping. The system is equipped with a robust air powered motor with a maximum power of 4 HP. The AWT-100X has a speed and torque control, allowing the operator to optimally set the speed and torque settings based on the application. The system can be used for almost any tube cleaning application, with or without water. This system is the absolute favorite for (heavy-duty) tube cleaning jobs.
Applications and usage
The AWT-100X tube cleaning system is designed to remove light, medium, and hard type deposits from heat exchanger tubes and various types of pipes. Think of: sludge, mud, soot, ash, and scale. The system can be used for different tube diameters, usually from about 14-15 millimeters and up. The AWT-100X is especially interesting for the following systems/installations:
- Shell and tube heat exchangers
- Boiler fire tubes
- Falling film evaporators
- Water-cooled chillers/condensers
- Flue gas coolers
- Dry pipe cleaning of production- and vacuum piping
Features AWT-100X
The AWT-100X system has been developed to clean heat exchanger tubes and piping as effectively and efficiently as possible. The system is therefore equipped with various useful features, such as:
- Equipped with a mobile dolly with 2 large wheels, making it easy and quick to transport on-site.
- Ability to change speed and torque to get the ideal setting to suit the cleaning application.
- Very powerful motor with a maximum power of 4 HP, has a variable speed of 500-3000 revolutions/minute, suitable for heavy-duty cleaning jobs; such as drilling open clogged tubes.
- Air powered motor is very reliable and offers extra safety, especially on industrial sites and factories.
- System can be used with or without water, also very effective for dry pipe cleaning of, for example, boiler fire tubes.
- Only rotate clockwise with threaded brushes and tools for the strongest connection.
Specifications AWT-100X
- Motor power: 4 HP (air powered)
- Speed: 500-3000 revolutions/minute (adjustable)
- Direction of rotation: clockwise only
- Easy to transport thanks to the mobile dolly with 2 large wheels
- Water requirements: minimum 2 bar at 7,5 litres/minute
- Air requirements: minimum 5 BAR - 3,0 m3/min air, maximum 7 BAR - 3,6 m3/min air
- Noise during use: 90 - 100 dB
- Dimensions: 43 x 51 x 94 centimeters (length x width x height)
- Weight: 25 KG (54 lbs)
Let us help!
| Article number: | AWT-100X |
Date: 29/08/2023
We use the Goodway Benelux AWT-100X tube cleaning system and GTC-721G flexible shafts for a yearly cleaning of our shell and tube heat exchangers on-site. The combination of the strong shafts and powerful AWT-100X tube cleaner ensures that the tubes can be cleaned very effectively without water.
Date: 16/08/2023
We use the AWT-100X and RAM-4X tube cleaners of Goodway Benelux to provide boiler tube cleaning services at our customers. The combination of flex hub scrapers and nylon abrasive brushes makes for good cleaning results, even if the deposits are harder.
Date: 10/07/2023
We rented an AWT-100X tube cleaner from Goodway Benelux to clean the fire tubes in our boilers. These are normally cleaned with a different system, but the level of fouling was too high. The AWT-100X in combination with the flex hub scraper and nylon abrasive brushes is ideal for removing (hard) deposits. We received support and service from Goodway Benelux and were able to carry out the cleaning very well. It was the first time we worked with this device.
Date: 07/06/2023
We have multiple large evaporators with a total of over 3.000 tubes on our production plant. Goodway Benelux combined the delivery of the evaporator tube cleaning equipment with a practical training given by their two experts to our operators. It was a good session in which we learned how to use the equipment and what it could do for us. We were immediately impressed by the effectiveness and simplicity of the equipment. Our evaporator tubes can now be cleaned on a regular basis with the correct equipment.
