Nylon Coiled Brushes are specially developed projectiles for the removal of light to medium hard deposits in tube bundles. These projectiles are the next step after tube scrubbers.
Customer reviews:
To clean our condenser tubes, we use nylon coiled brush projectiles and QS-300's from Goodway Benelux. It's a very effective and efficient cleaning method for water-cooled condensers at power plants. After cleaning, we see a clear improvement in cooling capacity of our condensers.
Tube cleaning with nylon coiled brushes
Nylon coiled brushes are specially designed to remove soft to medium hard type deposits from tube bundles, such as condensers and heat exchangers. They incorporate a revolutionary piston design which features durable nylon bristles set in a coil, wrapped around a wear-resistant polymer core. Superior to wooden dowel cores, Goodway's piston design allows the brushes to be quickly inserted into the tubes and helps maximize the cleaning effectiveness of the bristles. The strong nylon bristles thoroughly scrape the tube wall; during this process the deposits will come off and be flushed out of the tube together with the water flow.
The contact material of these types of projectiles is nylon. This makes them strong enough to remove deposits , but not strong enough to damage the tube material. This makes these projectiles an excellent replacement or even upgrade of the traditional high pressure cleaning. These projectiles are therefore also very interesting for cleaning titanium tubes.
Usability
Nylon coiled brushes are used for light to medium hard type deposits, such as:
- Algae
- Mud
- Sludge
- Sand
- Clams
- Mussels
These types of deposits are often found in surface condensers of power plants. For example, the condensers use river water as a cooling medium. After some time, adhesion to the tube wall occurs, which results in a reduced efficiency.
Specifications Nylon Coiled Brushes
| Range tube inner diameter: | Approx. 12,6 - 30,0 millimeter |
| Material of the projectile: | Nylon |
| Compatibility propulsion systems: | QS-300 and BFP Big Shot |
| Reusability: | 3-5 times depending on various factors |
| Coding: | Color coding for easy identification |
Advantages of projectile tube cleaning
Cleaning and maintenance with projectiles can offer many advantages over traditional methods. Take a look at the biggest advantages below:
- Speed. Time saving in projectile cleaning is the biggest advantage. Tubes can be shot through with projectiles within seconds, regardless of their length. With 2 operators you can clean approximately 750/1000 tubes per hour depending on the right conditions. That's faster than any method available. Projectile tube cleaning allows for an overal shorter downtime.
- Cost reduction. Projectiles are relatively inexpensive and can be reused, so the cost per cleaning is much less than, for example, with high pressure. In addition, the risk of damage to the tubes is virtually nil. This excludes future costs for replacement or repair.
- Safety. Projectiles are shot at low pressure. This is not only safer for the operators, but also for the system itself. Tubes are not exposed to high pressures internally, as with high pressure cleaning.
- Water consumption. Projectiles are shot through the tubes within seconds. The actual water consumption per tube being cleaned is therefore very low compared to alternative cleaning methods.
Expert advice
Nylon coiled brushes work best when they are slightly oversized relative to the tube internal diameter. The experts of Goodway Benelux always recommend that you contact us to choose the right type of projectile. This increases the chance of a successful cleaning. Click on this link to take you to our customer service.
Let us help!
| Article number: | CB-062-18 |
Date: 14/02/2024
To clean our condenser tubes, we use nylon coiled brush projectiles and QS-300's from Goodway Benelux. It's a very effective and efficient cleaning method for water-cooled condensers at power plants. After cleaning, we see a clear improvement in cooling capacity of our condensers.
